INPUT VOLTAGE: 10-32V
OUTPUT VOLTAGE: 12-35V
INPUT CURRENT: 10A(MAX)
OUTPUT CURRENT: 16A(MAX) (If more than 10A add Fan for cooling)
NO LOAD CURRENT: 25mA
1). DIY one output adjustable car power, only need to input your access to the 12v power supply, the output voltage you can free (14-35V) continuous adjustment, but the output voltage cannot be lower than the input voltage. 2) universal on-board laptop power supply.On your 12 v power supply input, the output voltage can work into your laptop.
3). Booster charger, you can use the 12 v power supply is higher than 12V battery charging, such as the 24V battery.
4) electronic equipment power supply for you,as long as you need to adjust voltage the voltage and current shall not exceed the rated current can be normal work.
5). System level power supply before, when you are doing a project when the input is 113Vto 18V, and your system board and will need about 24V power supply and the power is large, using ordinary DC – DC module power is too small, that you choose this module we will be your best choice,
can get a job, don’t need to debug direct easily achieve efficient high-power booster.
- with in the 12 v wire length 1 meter Wire is not less than 1.5 square, please bold if greater than 1 m wire length.
- The module in high power, high temperature, and the shell Please install the fan, small power without the fan, it is Important to ensure the module radiator temperature cannot exceed 80 degrees.
- The use of input cannot meet the output short circuit.
4.Not less than 10.5 V, 12 V battery discharge voltage lithium batteries in series (single section 3.7 V) discharge voltage not less than 2.7 V.
5.Input IN+ the anode, the IN-input cathode, OUT + output positive, OUT – output is negative.
- The work efficiency of modules?I’m up for high efficiency used in battery can use?
A: the module efficiency is in the synchronous rectifier is very high, we test the highest efficiency can reach 95%.And friends don’t blindly pursue high efficiency, high efficiency and price is proportional to, you need to 5 v 0.5 A power supply, for example, 80% of the energy efficiency loss is 0.625 W, 90% of the energy efficiency loss is 0.278 W, what do you think it is necessary to no for the 0.3 W power double cost?Choose a share.
- The power supply module has short drools protectionn accidentally when using the output short circuit will blow out?
A: there is no short circuit protection, please input with fuse or protective circuit.
- The module of the working voltage is 10-32V, so can 1 type 16V output 13y?
A: no. This module is the booster module (BOOST) his output voltage is always higher than the input voltage.. YOU want to output voltage is greater than the below please choose our step-down voltage power supply module (BUCK).
- This module can be current in 19V 4.75A long running?
A: this module design power is 100W, he can run in A 100 IN power for A long time, 19V. 4.75A = 90.25W therefore is to be able to run for A long time..
- I need about 20A current, this module can be parallel work?
A: output directly in parallel is not possible, will form a large circulation between them, If you want to output parallel operation,you need to adjust the voltage of each
module into the error is less than 50 millivolts, this can worklso need to pay attention
to avoid a single module,overload output should not exceed 70% of the total power module
- How much is this module working environment temperature, can achieve industrial grade?
A: yes, but when the environment temperature for more than 40 degrees, please reduce power use, or enhance heat dissipation.
- I see your modules with a potentiometer Is above, can damage because of the potentiom eter output voltage jump?
A: no, the module Is used by many precision potentiometer,his adjustment precision and reliability is very high,there will be no sudden high output voltage,you can rest assured use
- 1 see your module power is 100 w, I if 30 v voltage output current should be how much?
A: this can be calculated by the formula P = U 1, I = P/U, output voltage 30 v current is 33 A, 19 v output voltage current is 5.26 A, current of 6.66 A output voltage 15 v.
Estimate delivery time:12-30 days